• <rp id="odd3y"></rp>
  • <cite id="odd3y"><span id="odd3y"><var id="odd3y"></var></span></cite>
    <tt id="odd3y"><noscript id="odd3y"><samp id="odd3y"></samp></noscript></tt>

    <s id="odd3y"><optgroup id="odd3y"></optgroup></s>

      <rt id="odd3y"><meter id="odd3y"><p id="odd3y"></p></meter></rt>
      1. <rp id="odd3y"></rp>
      2. <cite id="odd3y"></cite>
        <rp id="odd3y"></rp>
        <rp id="odd3y"></rp>
        1. <cite id="odd3y"><span id="odd3y"></span></cite>

          <video id="odd3y"><menu id="odd3y"><button id="odd3y"></button></menu></video>
          20年專注電子焊接東莞市綠志島金屬有限公司
          全國咨詢熱線:135-2799-2739
          綠志島新聞中心-錫膏、焊錫條、焊錫絲
          聯系我們
          聯系人:曾經理
          手機:135-2799-2739
          電話:0769-38893080
          郵箱:anson@dglzd.com
          地址:東莞市石排鎮田邊村石貝工業區
          產品動態

          最新推出無鉛中溫Sn/Bi/Cu合金錫膏—PF-3005-C

          作者:張建斌 2021-10-19 0

          綠志島金屬有限公司最新推出無鉛中溫Sn/Bi/Cu合金錫膏,型號:中溫錫膏PF-3005-C具特性如下:

          1. 熔點低(146190℃),焊接溫度接近錫鉛錫膏,對元器件和板材耐熱性要求低,生產工藝窗口大;

          2. 相對于目前常用的無鉛合金錫膏(如Sn/Ag/CuSn/Bi/Ag),成本低;

          3. 熱導性好,在散熱模組產品上應用此產品,其熱導率比Sn/Bi合金增高一倍左右;

          4. 此合金機械強度接近Sn/Ag/Cu合金。

          4. 此產品采用球形度好、顆粒度分布均勻的錫粉煉制而成,粘度適中,適應各種涂布方法;

          5. 印刷滾動性、脫膜性及抗坍塌性均表現優良,可有效解決密間距和小元件的焊盤印刷;

          6. 潤濕性好,能適應不同的金屬鍍層;焊后板面殘留極少且透明、阻抗高,焊點平滑飽滿;

          7. 此款合金錫膏可作為Sn/Ag/Cu合金(表面貼裝和通孔涂布工藝)及Sn/Bi(散熱模組)類型產品的替代品;可有效地緩解焊料行業中對Ag需求的劇烈增加和避免無鉛的高溫焊接;解決了Sn/Bi焊料在散熱模組產品上的低熱導問題。


                  Legret metal Co., Ltd. launches the middle temperature Lead-free solder paste Sn/Bi/Cu newly. Its characteristics are as follows:

          1. Lower melting point, weld temperature is close to the Sn/Pb solder paste.Lower heat-resistant requirements of the components and panels, the production technology window are larger;

          2. Lower cost to the common Lead-free solder paste that currently used (such as Sn/Ag/Cu or Sn/Bi/Ag);

          3. Good thermal conductivity, using this product on the products of mould group of heatsink, its heat conduction rate increases by about one time than Sn/Bi alloy;It shows good thermal conductivity. Its heat conduction rate increases by about one time of the Sn/Bi alloy's when used on the mould group of heatsink. 

          4. The mechanical intensity of this alloy is close to Sn/Ag/Cu.


          附本錫膏應用案例:

          1、應用于散熱器的焊接

          2、應用于表面貼裝

          電路板

          山猫直播